Reef Ready Aquariums

REEF READY

Skimmer cups and external hang on pre-filters are a thing of the past! Reef tank maintenance just became easier, and more enjoyable with the TRUVU line of REEF READY aquariums.

Reef Ready aquariums up to 60” in length are factory fitted with a single permanent built in overflow. Aquariums from 60” to 96” have dual overflows, pre-drilled, to accommodate a standard 1” bulkhead fitting.

Overflow chambers are designed to hold a DLS roll around a perforated 1” PVC pipe that snugly fits into the bulkhead fitting at the base of the overflow. The DLS acts as a mechanical pre-filter; ensuring that the water that enters the wet/dry, refugium or sump is crystal clear and free of particulate matter.

For an additional charge the overflow can be fitted with a raceway for electrical wires. In this way electrical wires can be safely conducted through a dry section of the over flow so no electrical wires are visible on the outside of the aquarium, enhancing the aquariums overall visual appeal.

NEW!

Integrated Return System. The integrated return system is designed to return the filtered water back into the aquarium through a ¾ “ bulkhead, located, in the bottom of the overflow. A ¾” hose barb slip fittings is placed into the bulkhead and a piece of vinyl hose is attached. The water flows up through the vinyl hose into a ¾” elbow at the top of the overflow. The water is conveyed through a ¾” “Y” reducer into, dual ½” locklines, which can be directed as the aquarist wishes.